Brushcutter Diary 2023

Brushcutter Diary 2023Updated: November 20th, 2023

Author:-elf

Created: April 29th, 2023

Start the bund before end of May each year: North end?

2023

November 20th Along track to Trekensa and around crop area 1T
October 4th Extended LTP and edges of track to it. Track edges from Here to the TF and some around the crops area 1T
August 28th Path up the triangle field to the Long Term Parkup (LTP) and some around the crops area 1T
August 21st North along bund to the breach 2T and across the triangle fields and far field 2T
August 15th Clear turning area by wagon and some by veggie area. 1T
August 7th Around veggie area and wagon 1T
August 4th Around veggie area and wagon 1T
July 21st Along the bund north to and around the breach 1T
July 20th Along the bund north inc Japanese Knotweed area. 1T
July 17th Cleared track north in the triangle field & along the bund north to the elderflower tree. All done far to late . . . 2T
July 12th Collected from Bennet's £60
June 19th Took to Bennet's
June ??th Brushcutter around workshop 1T
June 11th 2nd repair to harness
May 30th Harness broke
May 29th Used strimmer around buffer to get water from 'marsh' and around veggie area 1T
May 29th Used strimmer to clear track up and down to Trekensa 2T
May 26th Used strimmer around wagon, track, ALP and veggie area 2T
May 22nd Used 2 blade brushcutter, south across the far field to the drain 1T
May 20th Used 2 blade brushcutter, across the small triangle field and far field to the drain 1T
May 18th Bought 5Lt. fuel to carry on clearing paths.
May 17th Used 2 blade brushcutter, across the triangle field. (first time I remember doing in with one tank of fuel) 1T
May 16th Used 2 blade brushcutter, along the bund from the breach, almost to the end 1T
May 7th Used 2 blade brushcutter, along the bund north to the willow tree. 1T
Went to do a second run and the pull starter has jammed: See comment 1
Managed to get the second cut done, up to and around the breach. 1T
May 4th Used 2 blade brushcutter, along the bund to the boat and north to the elderflower tree. 1T

Total 27 tanks (20.25Lt)

Comment No. * from: roger [Member]

Went to do a second run and the pull starter has jammed:

Removed the starter and it turns.
move the shaft back a mill and it seems to turn.
Replace and all turns but have the stalling issue, starts and then no power and shuts down.

Link to parts
https://www.diyspareparts.com/parts/stihl/diagrams/fs-460-c/2ca9401b-afdb-4fda-9c56/